HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

NotesParameter
Specification condi-
tions
For the devnums parameter, you can specify multiple
device numbers for a THP/Smart volume. To specify
five or more device numbers, write them separately
on multiple command lines. If you specify five or
more device numbers on one command line and
then perform batch processing, an error might occur
with the error message KAIC90084-E that has the
response value 413 Request Entity Too
Large.
capacity
clprNumber
devnums
poolid
threshold
tieringpolicy
tierrelocation
newpageassignmenttier
relocationpriority
No restrictions
Table 214 Conditions for specification of parameters for the ModifyVLDEV command
NotesParameter
Specification condi-
tions
--
model
serialnum
vldevoperation
vrpuid
Condition-1
If a batch file has multiple ModifyVLDEV command
lines and one of them specifies the vdevnum or
vssid parameter, specify the command line that
has the parameter first. Values are automatically set
if these parameters are omitted. As such, if the
command with the parameter omitted is executed
first, the value that is automatically assigned during
the first command execution might differ from the
value specified for the parameter in the second
command execution, thus causing an error.
devnum
vcvs
vdevnum
vemulation
vluse
vssid
No restrictions
Examples of batch file creation
The following are examples of batch files created according to the specified format, input rules, and
parameter conditions.
beginbatch
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-A domain=0 devnum=816 lun=100
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-A domain=0 devnum=817 lun=101
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-B domain=0 devnum=816 lun=102
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-B domain=0 devnum=817 lun=103
endbatch
Using the batch functionality
The batch functionality uses batch files. When the batch functionality is used, commands that satisfy
the execution conditions are processed together. The command execution results are also output each
time they are processed together.
Batch functionality514