HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionAttribute
Tiering Policy ID
This attribute is valid only when Smart volumes are used in HP XP7 or P9500.
For details about the output values, see the policyid parameter in Table 93.
policyID
Maximum allocation threshold value (%) for Tier 1
If a tiering policy has been applied, the maximum capacity threshold value
allocated for Tier 1 is output.
allocation-
ThresholdT1Max
#1, #2
Minimum allocation threshold value (%) for Tier 1
If a tiering policy has been applied, the minimum capacity threshold value allocated
for Tier 1 is output.
allocation-
ThresholdT1Min
#2
Maximum allocation threshold value (%) for Tier 3
If a tiering policy has been applied, the maximum capacity threshold value
allocated for Tier 3 is output.
allocation-
ThresholdT3Max
#2
Minimum allocation threshold value (%) for Tier 3
If a tiering policy has been applied, the minimum capacity threshold value allocated
for Tier 3 is output.
allocation-
ThresholdT3Min
#2
Number of V-VOLs.
The number of Smart volumes assigned to the Smart pool is output.
numberOfVVols
#1
If a data placement profile have been applied from the GUI, the capacity ratio of Tier 1 might
exceed the value specified for the maximum allocation threshold.
#2
If you are using HP XP7 or P9500 (with a microcode version of 70-05-00-XX/XX or later) valid
values are output.
URLLink instance
Commands for which a URLLink instance is output
• AddURLLink, page 371
• GetURLLink, page 378
Table 181 URLLink instance attributes
DescriptionAttribute
Object ID of URLLinkobjectID
Name of the URLLink
name
Additional description of the URLLink
This item is output only when an additional description is registered.
description
URL of an application or a Web page
url
CLI Reference Guide 495