HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionAttribute
Device number of the S-VOL
For HP XP7, P9500, or XP24000/XP20000:
The value is output in the ww:xx:yy format, where ww is the logical DKC
number, xx is the CU number, and yy is the LDEV number.
For XP12000/XP10000/SVS200 or XP1024/XP128:
The value is output in the xx:yy format, where xx is the CU number and yy
is the LDEV number.
displaySvolDevNum
Path group ID of the RCU
If the storage system that contains the MCU is HP XP7, P9500, XP24000/XP20000,
or XP12000/XP10000/SVS200, one of the following values is output:
For Continuous Access Synchronous, Continuous Access Asynchronous, and
Continuous Access Journal:
- -1: Unknown
- 0 to 255 Path group ID of the RCU
- 513: RCU for specific CU
- 514: None
For other products:
- -1 (None)
-1 is output for other storage systems.
A valid value is displayed if you are using XP24000/XP20000 with a microcode
version of 60-04-00-XX/XX or later.
The value for Continuous Access Journal is displayed only when you are using HP
XP7 or P9500 (with a microcode version of 70-05-00-XX/XX or later).
remotePathGroupID
Currently, this information does not apply to storage systems (-1 is output).pvolMngAreaPoolID
Currently, this information does not apply to storage systems (-1 is output).svolMngAreaPoolID
Snapshot group ID
If HP XP7 or P9500 is used and all the following conditions are met, a valid value
is output:
• The copy type is FastSnap.
• The copy pair belongs to the snapshot group.
This information is invalid for other cases (-1 is output).
snapshotGroupID
Serial number of the P-VOL defined in the HORCM configuration file
This information is invalid for Fast Snap.
confPvolSerialNum-
ber
Device number of the P-VOL defined in the HORCM configuration file
This information is invalid for Fast Snap.
confPvolDevNum
Serial number of the S-VOL defined in the HORCM configuration file
This information is invalid for Fast Snap.
confSvolSerialNum-
ber
Device number of the S-VOL defined in the HORCM configuration file
This information is invalid for Fast Snap.
confSvolDevNum
CLI Reference Guide 481