HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionAttribute
Type of the drive
If the storage system is HP XP7 or P9500 and a THP pool is used, one of the
following values is output:
• 1: SATA
• 4: SAS
• 5: SSD or FMD
• -1: If any of the following conditions are satisfied
• The drive type is unknown
• Drive drive types are mixed (except for SSD and FMD)
• Drives with different drive speeds are mixed
This information is invalid for other cases (-1 is output).
diskType
Indicates whether the pool is a Smart pool.
• enable: Smart pool
• disable: THP pool
tierControl
Indicates whether the automatic execution of performance monitoring and hardware
tier relocation is enabled.
This attribute is valid only when the storage system is HP XP7 or P9500 and a
Smart pool is used.
• enable
• disable
autoMigration
Execution cycle of performance monitoring and hardware tier relocation
• 0: 30 minutes
• 1: 1 hour
• 2: 2 hours
• 4: 4 hours
• 8: 8 hours
• 24: 24 hours
migrationInterval
#1
Start time of performance monitoring (example: 00:00)
This attribute is valid only when migrationInterval is 24.
monitorStartTime
#1
End time of performance monitoring (example: 23:59)
This attribute is enabled only when migrationInterval is 24.
monitorEndTime
#1
Performance monitoring mode
• 0: Periodic
• 1: Continuous
monitoringMode
#1
Indicates whether a THP/Smart pool can be configured by mixing internal and
external volumes.
• enable
• disable
externalMixCompat-
ible
CLI Reference Guide 467