HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

• AddLun, page 317
• AddLUSE, page 88
• AddVirtualVolume, page 121
• FormatLU, page 160
• GetStorageArray (subtarget=ArrayGroup) , page 178
• GetStorageArray (subtarget=LDEV) , page 197
• GetStorageArray (subtarget=LogicalUnit) , page 202
• GetStorageArray (subtarget=MFReplicationInfo) , page 208
• GetStorageArray (subtarget=Pool) , page 218
• ModifyVirtualVolume, page 287
Table 152 LDEV instance attributes
DescriptionAttribute
Object ID of the LDEV
objectID
LDEV name
This item is output if it has been registered.
name
Device number of the LDEV
For HP XP7, P9500, or XP24000/XP20000, a combination of a logical DKC
number, a CU number, and an LDEV number
(=logical-DKC-number*65536+CU*256+LDEV) is output.
For XP12000/XP10000/SVS200 or XP1024/XP128, a combination of a CU
number and an LDEV number (=CU*256+LDEV) is output.
devNum
Display name of the LDEV
displayName
Emulation mode
This item is output for HP XP7, P9500, XP24000/XP20000,
XP12000/XP10000/SVS200, or XP1024/XP128 (example: OPEN-8).
emulation
Number of cylinders in the LDEV
For HP XP7, P9500, XP24000/XP20000, XP12000/XP10000/SVS200, or
XP1024/XP128:
• When a mainframe volume or intermediate volume is used: Number of cylinders
in the LDEV
• When an open volume is used: 0
cylinders
Indicates whether the LDEV is used on a LUSE volume:
• 0: Not a LUSE volume
• 1: LUSE volume
isComposite
LDEV size (in KB)
sizeInKB
Number of LBAs (capacity in blocks)
lba
CLI Reference Guide 443