HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Copy pace (number of tracks copied at one time during initial
copy)
You can specify an integer from 1 to 15.
If you omit this parameter, 3 is specified.
If Snapshot or ContinuousAccessJournal is specified for
the replicationfunction parameter, this parameter is
ignored.
Optional
copytracksize
The following value can be specified only when
XP12000/XP10000/SVS200 is being used:
suspend: Creates a delta resync pair.
Optional
pairoption
Parameter values to obtain in advance
Parameter values to obtain in advance depend on how you will create a copy pair.
• When Method 1 is used:
See No. 1, No. 4, No. 5, and No. 7 in the table below.
• When Method 2 is used:
See No. 2, No. 3, No. 4, No. 5, No. 6, and No. 7 in the table below.
• When Method 3 is used:
See No. 2, No. 4, No. 5, No. 6, and No. 7 in the table below.
Table 131 How to obtain parameter values (AddReplication command)
How to obtainParameter nameNo.
Execute the GetHost command with the host name indicated below for the
hostname parameter.
• When managing copy pairs by using local management
Specify the host on which the RAID Manager instance that manages the
P-VOL is installed.
• When managing copy pairs by using central management
Specify the host that centrally manages copy pairs.
The execution result of the GetHost command displays the
replicationGroupID value under An instance of
ReplicationGroup.
See the output under the line that reads An instance of
ReplicationGroup for which the target group name is displayed as the
groupName value. The replicationGroupID value corresponds to the
replicationgroupid parameter value.
replicationgrou-
pid
1
CLI Reference Guide 399