HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Group name used in the RAID Manager
Use a maximum of 31 bytes for a group name. The group name
cannot begin with a hash mark (#) or a hyphen (-).
For details about the characters that can be used in group names,
follow the rules for RAID Manager.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
groupname
ID of the host that recognizes the primary volume (P-VOL)
If you are using method 2 or 3, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
pvolhostid
Number of the HORCM instance that manages the P-VOL
If you are using method 2, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
pvolinstan-
cenum
Port number of the HORCM instance that manages the P-VOL
Depending on the host OS, specify the appropriate value:
• For Solaris systems: Specify an integer in the range 0-65535.
• For AIX, Windows, HP-UX, or Linux systems: Specify an integer
in the range 1-65535.
If you are using method 3, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
pvolportnum
ID of the host that recognizes the secondary volume (S-VOL)
If you are using method 2 or 3, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
svolhostid
Number of the HORCM instance that manages the S-VOL
If you are using method 2, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
svolinstan-
cenum
Port number of the HORCM instance that manages the S-VOL
Depending on the host OS, specify the appropriate value:
• Solaris systems: Specify an integer in the range 0-65535.
• For AIX, Windows, HP-UX, or Linux systems: Specify an integer
in the range from 1-65535.
If you are using method 3, you must specify this parameter.
If the replicationgroupid parameter is specified, this
parameter is ignored.
Optional
svolportnum
Model of the storage system that contains the P-VOLRequired
pvolarraytype
Serial number of the storage system that contains the P-VOLRequired
pvolserialnum
CLI Reference Guide 395