HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Serial number of the storage system in the HORCM configuration
file that manages the S-VOL.
To define a copy pair configuration by using a virtual ID, specify
a virtual serial number.
The confsvolserialnum and confsvoldevnum parameters
must be specified at the same time.
Optional
(HP XP7)
confsvolserial-
num
Device number of the storage system in the HORCM configuration
file that manages the S-VOL.
To define a copy pair configuration by using a virtual ID, specify
a virtual device number.
The confsvolserialnum and confsvoldevnum parameters
must be specified at the same time.
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
The execution results are output in decimal.
Optional
(HP XP7)
confsvoldevnum
Type of operation that is to be executed with the copy pair
You can specify the following values:
• BusinessCopy: Business Copy
• ContinuousAccessSync: Continuous Access Synchronous
• ContinuousAccessAsync: Continuous Access Asynchron-
ous
• Snapshot: Snapshot
• ContinuousAccessJournal: Continuous Access Journal
Required
replication-
function
MU number of the P-VOL
This parameter can be specified only for Continuous Access
Journal.
For Continuous Access Journal if this parameter is not specified,
the MU number of the created HORCM configuration file for RAID
Manager is set to 1.
For Business Copy or Snapshot, the MU number of the created
HORCM configuration file for RAID Manager is set to 0. For
Continuous Access, the MU number of the HORCM configuration
file for RAID Manager is not set because the MU number is not
necessary for Continuous Access.
Optional
munum
Specify this parameter to create the configuration of the 3DC
delta resync.
You can specify suspend only.
This parameter can be specified only when Continuous Access
Journal is being used.
Optional
pairoption
Parameter values to obtain in advance
Parameter values to obtain in advance depend on how you will create the configuration definition
file.
CLI Reference Guide 385