HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

An instance of WWN
WWN=21.00.00.24.FF.2C.AE.19
An instance of WWN
WWN=21.00.00.24.FF.2C.AE.18
List of 1 CommParameters elements:
An instance of CommParameters
hdcIPAddress=10.208.119.110
ipAddress=10.208.119.113
portNumber=443
protocol=Secure
userID=root
*****: The value is encoded by the CLI.
Commands related to server management
The Server Management commands provide some management support for the Device Manager
server.
AddURLLink
AddURLLink allows a user to specify URL information (referred to as a URLLink) for a Device Manager
object managed by the Device Manager server.
AddURLLink is used for the following purposes:
• To specify a URLLink for an SMI-S enabled storage system
The URL information of the software started from Element Manager of the GUI is modified. Note
that a user can set only one URLLink for each SMI-S enabled storage system.
• To specify a URLLink to XP7 mainframe agent for a mainframe host
For a mainframe host, you can set a URLLink to the XP7 mainframe agent running on the mainframe
host. For details about how to specify the settings for managing mainframe hosts and information
on the AddURLLink command, see Appendix A on page 543.
NOTE:
This command does not support virtualization servers.
Format
When setting a URLLink for an SMI-S enabled storage system:
hdvmcli [URL] AddURLLink [options]
url=URL name=URLLink-name
linkedid=object-ID-of-the-SMI-S-enabled-storage-system
targetoption=smi-s
CLI Reference Guide 371