HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Specify this parameter if you want to change the IP address of
the instance of Host Data Collector to be connected.
IP address (IPv4 or IPv6) or host name can be specified.
Specify the value that is set for
hostdatacollectors.properties.
If a version of Device Manager earlier than 8.0 is used to register
a virtualization server that is being managed by vMA, you need
to specify both the hostprotocol and hdcipaddress
parameters. The method of managing virtualization servers
changes from vMA to Host Data Collector.
Optional
hdcipaddress
Parameter values to obtain in advance
hostname
Obtain this value from the execution result of the GetHost command. Execute this command by
specifying VMWARE_ESX for the hostfilter parameter. In the execution result of this command,
the name value appears under An instance of Host. In the hostname parameter, specify
the name value for the virtualization server whose information you want to modify.
Command execution example
This example modifies the password for a program that is used for managing a virtualization server
(host name: boss.boss), and registers the modified information into the Device Manager server
database.
hdvmcli ModifyVirtualizationServer
-o "D:\logs\ModifyVirtualizationServer.log"
"hostname=boss.boss" "hostuserpassword=boss!"
Command execution result
RESPONSE:
An instance of Host
objectID=*****
name=boss.boss
hostID=13
capacityInKB=21,995,840
hostType=3
managedBy=1
osType=VMware
statusOfDBUpdating=0
virtualizationServerVersion=VMware ESX 4.0.0 build-171294
List of 2 WWN elements:
An instance of WWN
WWN=21.00.00.24.FF.2C.AE.19
An instance of WWN
WWN=21.00.00.24.FF.2C.AE.18
List of 1 CommParameters elements:
An instance of CommParameters
hdcIPAddress=10.208.119.110
CLI Reference Guide 369