HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
New IPv4 IP address of an existing host
Omit this parameter if you are not changing the IPv4 IP address
of the host.
Optional
ipaddress
New IPv6 IP address of an existing host
Omit this parameter if you are not changing the IPv6 IP address
of the host.
Optional
ipv6address
OS type of the host after modification
One of the following values can be specified. The values are not
case-sensitive.
• AIX
• HP-UX
• Linux
• SunOS
• Windows
• VMware
• Others
If you specify VMware in this parameter, the host type will be
virtualization server. If you specify a value other than VMware,
the host type will be normal host.
You can specify this parameter for a host whose host type is
normal host or virtualization server.
Optional
ostype
Specify true only if the WWN of a normal host that was
registered earlier is migrated to the virtualization server.
When you specify this parameter to change the WWN of a
virtualization server, if the specified WWN is the same as the
WWN of a normal host that is already registered, the WWN of
the normal host is migrated to the virtualization server.
You can specify this parameter for a host whose host type
becomes virtualization server after the ModifyHost command
was executed. When you omit this parameter, if the specified
WWN is the same as the WWN of a normal host, an error
occurs.
Optional
takeoverwwn
Parameter values to obtain in advance
objectid
Obtain this value from the execution result of the GetHost command. In the execution result of
this command, the objectID value appears under An instance of Host. Use this objectID
value to specify the objectid parameter.
hostname
Obtain this value from the execution result of the GetHost command. In the execution result of
this command, the name value appears under An instance of Host. Use this name value
to specify the hostname parameter.
CLI Reference Guide 363