HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Format
hdvmcli [URL] AddVirtualizationServer [options]
ipaddress=IP-address-of-virtualization-server
#
hosttype=3
hostprotocol={Secure|Non-secure} hostuserid=user-ID-of-virtualization-server
#
hostuserpassword=user-password-of-virtualization-server
#
hdcipaddress=IP-address-of-Host Data Collector
#
Specify the value of VMware vCenter Server in a configuration in which VMware vCenter Server
is used to perform integrated management on virtualization servers. Information about all of the
virtualization servers managed by VMware vCenter Server is registered.
Parameters
Table 111 AddVirtualizationServer command parameters
DescriptionStatusParameter name
IP address of a virtualization server or VMware vCenter Server
You can specify an IPv4 or IPv6 IP address.
Required
ipaddress
Value indicating the host type
Specify 3.
3 indicates a virtualization server (VMware ESX or VMware ESXi)
Required
hosttype
Communication protocol for acquiring information about a
virtualization server
Specify the protocol for communication between Host Data
Collector and a virtualization server or VMware vCenter Server.
• Non-secure: HTTP communication
• Secure: HTTPS communication
Required
hostprotocol
User ID with administrator permissions for the virtualization server
or VMware vCenter Server
Required
hostuserid
Password for the user ID specified in the parameter hostuserid
Required
hostuserpass-
word
IP address of Host Data Collector
Specify the IP address (IPv4 or IPv6) or host name.
Specify the value that is set for
hostdatacollectors.properties.
If a version of Device Manager earlier than 8.0 is used to register
a virtualization server that has been managed by vMA, the
method of management changes so that the instance of Host Data
Collector specified by this parameter is used for management.
Required
hdcipaddress
Parameter values to obtain in advance
None.
Command reference338