HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Command execution result 1
RESPONSE:
An instance of LabelInfo
arrayType=P9500
serialNumber=54440
target=All
numberOfPoolNames=5
numberOfVolumeLabels=2,335
Command execution example 2
This example obtains label information about THP/Smart pools from the storage system, and then
applies the information to Device Manager.
hdvmcli RefreshResourceLabels -o "D:\logs\ RefreshResourceLabels.log"
model=P9500 serialnum=54440 target=PoolName
Command execution result 2
RESPONSE:
An instance of LabelInfo
arrayType=P9500
serialNumber=54440
target=PoolName
numberOfPoolNames=5
numberOfVolumeLabels=0
RefreshStorageArrays
The RefreshStorageArrays command refreshes the configuration information for all of the storage
systems (including SMI-S enabled storage systems) that are managed by the Device Manager server
to the most recent information.
Execute this command regularly to keep the Device Manager server database up to date. For storage
systems that are managed by Device Manager, configuration information that is created or modified
from the Remote Console, Remote Web Console, or RAID Manager is added to or updated in the
Device Manager server database each time this command is executed.
NOTE:
To specify a storage system and then refresh its configuration information, use the AddStorageArray
command. When the storage system already exists, the AddStorageArray command performs a
re-discovery operation on the storage system and refreshes the registered information on the Device
Manager server database.
Command reference306