HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

num parameters, and VResourcePartitionUnit for the subtarget parameter. In the exe-
cution results of this command, the required resourcePartitionUnitID value appears under
An instance of VResourcePartitionUnit. Use this value to specify the vrpuid para-
meter.
Command execution example
In this example, the ModifyVResourcePartitionUnit command changes the name of a virtual
resource group (resource group ID: 31) in a storage system (model: XP7, serial number: 10139) to
vrsg1.
hdvmcli ModifyVResourcePartitionUnit -o "D:\logs\ModifyVResourcePartitionUnit.log"
"model=XP7" "serialnum=10139" "vrpuid=31" "vrpuname=vrsg1"
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 VResourcePartitionUnit elements:
An instance of VResourcePartitionUnit
objectID=*****
name=vrsg1
resourcePartitionUnitID=31
arrayType=XP7
serialNumber=10139
vArrayFamily=XP7
vSerialNumber=10139
virtualStorageMode=enable
onDataMigration=false
vDisplayArrayFamily=XP7
numberOfVPorts=0
numberOfVHostStorageDomains=0
numberOfVLDEVs=0
*****: The values are encoded by the CLI.
RefreshPerformanceData
RefreshPerformanceData obtains storage system performance information collected by
Performance Advisor, and refreshes the Device Manager server database with the most recent
information.
NOTE:
This command can be used only when Performance Advisor is connected to. For details about the
environment settings required for connecting to Performance Advisor and obtaining performance
information, see the HP XP7 Command View Advanced Edition Administrator Guide .
CLI Reference Guide 303