HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

NOTE:
The values specifiable for the tieringpolicy parameter vary depending on the microcode version.
For details about the specifiable values, see the parameter descriptions.
Format for XP24000/XP20000
When the command is used to assign THP volumes to a THP pool:
hdvmcli [URL] ModifyVirtualVolume [options]
model=model serialnum=serial-number assign=true
devnums=device-number-of-THP-volume
poolid=pool-ID-of-THP-pool
[threshold=usage-rate-threshold-of-THP-volumes]
When the command is used to release the assignation between THP volumes and a THP pool:
hdvmcli [URL] ModifyVirtualVolume [options]
model=model serialnum=serial-number assign=false
devnums=device-number-of-THP-volume
When the command is used to change the usage rate threshold of THP volumes:
hdvmcli [URL] ModifyVirtualVolume [options]
model=model serialnum=serial-number
devnums=device-number-of-THP-volume
threshold=usage-rate-threshold-of-THP-volumes
Parameters
Table 94 ModifyVirtualVolume command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Specify true to assign THP volumes to a THP pool.
Specify false to release THP volumes from a THP pool.
Omit this parameter if you are changing the threshold value.
Optional
(XP24000
XP20000)
assign
Device number(s) of THP/Smart volume(s)
Specify this parameter as a decimal number or
colon-delimited hexadecimal number in the format
ww:xx:yy, where ww is the LDKC number, xx is the CU
number, and yy is the LDEV number. ww is optional. If ww is
omitted, LDKC is assumed to be 0.
Use a comma to delimit multiple values.
Required
devnums
CLI Reference Guide 289