HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

• Changes the maximum allocation threshold for Tier 1 to 50 (allocationthresholdt1max:
50)
• Changes the minimum allocation threshold for Tier 1 to 20 (allocationthresholdt1min: 20)
• Changes the maximum allocation threshold for Tier 3 to 40 (allocationthresholdt3max:
40)
• Changes the minimum allocation threshold for Tier 3 to 10 (allocationthresholdt3min: 10)
hdvmcli ModifyTieringPolicy -o "D:\logs\ModifyTieringPolicy.log"
model=P9500 serialnum=53039 policyid=10
allocationthresholdt1max=50 allocationthresholdt1min=20
allocationthresholdt3max=40 allocationthresholdt3min=10
Command execution result
RESPONSE:
An instance of StorageArray
.
.(Attributes of StorageArray are omitted here)
.
List of 1 TieringPolicy elements:
An instance of TieringPolicy
objectID=*****
policyID=10
allocationThresholdT1Max=50
allocationThresholdT1Min=20
allocationThresholdT3Max=40
allocationThresholdT3Min=10
numberOfVVols=4
*****: The value is encoded by the CLI.
ModifyVirtualVolume
The ModifyVirtualVolume command changes the settings related to a THP/Smart volume.
For HP XP7 and P9500
• This command expands a THP/Smart volume.
• This command applies the tiering policy and the new page assignment tier to the Smart volume.
• This command enables or disables hardware tier relocation for a Smart volume and changes the
relocation priority.
• This command changes the CLPR number of a THP/Smart volume where a path is not assigned.
For XP24000/XP20000
• This command assigns a THP volume to a THP pool.
• This command releases a THP volume from a THP pool.
• This command changes the usage threshold for THP volumes.
CLI Reference Guide 287