HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

NOTE:
• Even if the topology value is changed, the change might not be immediately applied. In such
cases, refresh the storage system by using the AddStorageArray command after waiting for
about a minute.
• Even if the value for Fibre Channel is changed, the change might not be immediately applied. In
such cases, after confirming that the target port has been connected to the fibre network, refresh
of the storage system by using the AddStorageArray command.
• If you change the attributes (channel speed or topology) of a port that is set to high-speed mode,
the same change is applied to the attributes of all the ports that are in the same high-speed unit
as the target port. The attribute change made to ports other than the target port is not immediately
applied to the Device Manager server database. Therefore, after you execute the ModifyPort
command, refresh the storage system by executing the AddStorageArray command. You can
check whether the target port is set to high-speed mode from the mode attribute of the PortCon-
troller instance that is output as the execution result of the GetStorageArray (subtar-
get=PortController) command.
Format for HP XP7, P9500 (when a connection other than an FCoE connection is used),
XP24000/XP20000, and XP12000/XP10000/SVS200
hdvmcli [URL] ModifyPort [options]
serialnum=serial-number model=model
{port=port-number|portname=port-name}
[topology=new-port-topology]
[fibreaddr=new-Fibre-Channel-address-for-the-port]
[channelspeed=new-transmission-speed-for-Fibre-Channel-connection-to-port]
[lunsec={true|false}] [domain=domain-ID]
[nickname={new-host-storage-domain-name|existing-host-storage-domain-name}]
[newdomainnickname=new-host-storage-domain-name]]
[hostmode=host-mode-for-port] [hostmodeoption=host-mode-option-list]
[wwn=WWN wwnnickname=WWN nickname]
[wwn=WWN newwwnnickname=new-WWN-nickname]
[wwnnickname=WWN-nickname newwwnnickname=new-WWN-nickname]
Format for P9500 (when an FCoE connection is used)
hdvmcli [URL] ModifyPort [options]
serialnum=serial-number model=model
{port=port-number|portname=port-name}
[fibreaddr=new-Fibre-Channel-address-for-the-port]
[lunsec={true|false}]
[domain=domain-ID]
[nickname={new-host-storage-domain-name|existing-host-storage-domain-name}]
[newdomainnickname=new-host-storage-domain-name]]
[hostmode=host-mode-for-port] [hostmodeoption=host-mode-option-list]
[wwn=WWN wwnnickname=WWN nickname]
[wwn=WWN newwwnnickname=new-WWN-nickname]
[wwnnickname=WWN-nickname newwwnnickname=new-WWN-nickname]
Command reference274