HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Threshold1 of the THP/Smart pool (%)
The threshold1 of the THP/Smart pool is the usage rate of the
THP/Smart pool.
The following values can be specified when modifying the
threshold value:
For P9500 whose microcode version is earlier than 70-01-
4X-XX/XX:
Specify a multiple of 5 in the range from 5 to 95.
For HP XP7 or P9500 (with a microcode version of 70-01-
4X-XX/XX or later):
Specify an integer in the range from 1 to 100.
For XP24000/XP20000:
Specify a multiple of 5 from 5 to 95.
You need to specify a value smaller than the one specified for
threshold2.
Optional
threshold
Threshold2 of the THP/Smart pool (%)
The threshold2 of the THP/Smart pool is the usage rate of the
THP/Smart pool.
The following values can be specified when modifying the
threshold value:
For P9500 whose microcode version is earlier than 70-01-
4X-XX/XX:
A value cannot be specified for threshold2.
For HP XP7 or P9500 (with a microcode version is 70-01-
4X-XX/XX or later):
If you specify this parameter, threshold2mode must be
set to 1.
Specify an integer in the range from 1 to 100.
You need to specify a value larger than the one specified
for threshold.
You need to specify a value larger than the one specified for
threshold.
Optional
(HP XP7
P9500)
threshold2
Specify whether to use the value specified for threshold2 for
the THP/Smart pool.
One of the following values can be specified:
• 0: Uses the value determined by the storage system.
• 1: Uses the value specified for threshold2.
You can specify 1 only for HP XP7 or P9500 (with a micro-
code version is 70-01-4X-XX/XX or later).
Optional
(HP XP7
P9500)
threshold2mode
Command reference264