HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

ManualsBrandsHP ManualsSoftwareHP Command View XP AE Media Kit

261

262

263

264

265

266

267

268

269

270

To expand a THP/Smart pool, the following conditions must be satisfied:

• The conditions on logical units to be specified as pool volumes, which are listed in “Ad-

dPool” on page 99.

• For HP XP7, P9500, and XP24000/XP20000, the status of the THP/Smart pool is not Blocked

and the usage rate is not 100%.

For HP XP7, P9500, and XP24000/XP20000, the following conditions must be satisfied if you want

to change the settings related to a THP/Smart pool:

• If the status of the THP/Smart pool is Normal, the usage rate is less than 95%.

• When changing the threshold value, you specify a value that is larger than the value set for the

usage rate of the THP/Smart pool at that time.

Format for HP XP7 and P9500

When the command is used to expand a THP/Smart pool:

hdvmcli [URL] ModifyPool [options]

model=model serialnum=serial-number poolid=pool-ID

adddevnums=device-number-of-logical-unit

[threshold=THP/Smart-pool-threshold-1]

[threshold2=THP/Smart-pool-threshold-2] [threshold2mode={0|1}]

[overprovisioningwarning=over-provisioning-warning-threshold]

[overprovisioninglimit=over-provisioning-limit-threshold]

[tiercontrol={enable|disable}]

[automigration={enable|disable}] [migrationinterval={0|1|2|4|8|24}]

[monitorstarttime=start-time-of-performance-monitoring]

[monitorendtime=end-time-of-performance-monitoring]

[monitoringmode={0|1}]

[name=label-of-THP/Smart-pool]

[reflectoption={true|false}]

[relocationspeed={1|2|3|4|5}]

This can be specified only for P9500.

This can be specified only for HP XP7.

When changing only the settings related to the THP/Smart pool: