HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

monitorEndTime=23:59
monitoringMode=0
externalMixCompatible=disable
monitoringState=1
lastMonitorStartDate=2011/07/14 07:48:00
lastMonitorEndDate=-1
relocationState=0
relocationProgress=-1
relocationSpeed=-1
numberOfTiers=1
thresholdRepDepAlert=-1
thresholdRepDataReleased=-1
userUsedCapacityInKB=-1
repDataCapacityInKB=-1
repManageCapacityInKB=-1
numberOfThpVols=-1
capacityOfThpVolsInKB=-1
*****: The value is encoded by the CLI.
GetVStorageArray
The GetVStorageArray command obtains information about a virtual storage machine.
NOTE:
You can use this command only when you are using HP XP7.
Format
hdvmcli [URL] GetVStorageArray [options]
[vfamily=virtual-storage-machine-family]
[vserialnum=virtual-storage-machine-serial-number]
[subtarget=VResourcePartitionUnit] [vrpusubinfo=VLDEV,VPort]
Parameters
Table 83 GetVStorageArray command parameters
DescriptionStatusParameter name
Family of the virtual storage machine
This parameter must be specified together with the vserialnum
parameter. If the vserialnum parameter is not specified, this
parameter is ignored and information about all virtual storage
machines is obtained.
Optional
vfamily
Serial number of the virtual storage machine
This parameter must be specified together with the vfamily
parameter. If the vfamily parameter is not specified, this
parameter is ignored and information about all virtual storage
machines is obtained.
Optional
vserialnum
CLI Reference Guide 249