HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

poolids
Obtain this value from the execution result of the GetStorageArray (subtarget=Pool)
command. When you execute this command, specify values that have been obtained in advance
for the serialnum and model parameters, and then specify 5 (Thin Provisioning) for the
poolfilter parameter. In the execution results of this command, the values of poolID and
tierControl appear under An instance of Pool. The An instance of Pool for
which enable is displayed for the tierControl value is information about a Smart pool.
Specify the poolID value of the Smart pool for which the execution status of performance mon-
itoring or hardware tier relocation is obtained for the poolids parameter.
Command execution example
hdvmcli GetTieredPoolStatus -o "D:\logs\GetTieredPoolStatus.log"
serialnum=53039 model=P9500 poolids=1
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Pool elements:
An instance of Pool
objectID=*****
name=MyPool
poolFunction=5
poolID=1
encrypted=-1
controllerID=-1
poolType=32
status=20
threshold=70
threshold2=80
threshold2Mode=0
capacityInKB=319,678,464
freeCapacityInKB=319,678,464
usageRate=0
numberOfPoolVols=31
numberOfVVols=1
capacityOfVVolsInKB=419,457,024
clprNumber=0
raidLevel=RAID5
combination=3D+1P
volAlertNotice=-1
overProvisioningPercent=131
overProvisioningWarning=-1
overProvisioningLimit=500
rpm=10,000
diskType=4
tierControl=enable
autoMigration=disable
migrationInterval=24
monitorStartTime=00:00
Command reference248