HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
ID of the virtual host storage domain
Specify this parameter when you want to obtain information about
a specific virtual host storage domain.
If you specify this parameter, you must also specify the vfamily,
vserialnum, vport, and vrpusubinfo parameters. For the
vrpusubinfo parameter, specify VHostStorageDomain.
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
Optional
vdomain
Device number of the virtual LDEV
Specify this parameter when you want to obtain information about
a specific virtual LDEV.
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
If you specify this parameter, you must also specify the vfamily,
vserialnum, and vrpusubinfo parameters. For the
vrpusubinfo parameter, specifyVLDEV.
The execution results are output in decimal.
Optional
vdevnum
Starting sequence number of virtual host storage domains for which
you want to obtain information
Specify this parameter if you want to obtain virtual information
about some of the virtual host storage domains in a specific storage
system.
When virtual host storage domains are ordered as shown below
and numbered from 0 upward, specify the sequence number of
the virtual host storage domain from which you want to start
obtaining information.
Order of virtual host storage domains:
1. Port IDs in ascending order
2. Domain IDs in ascending order
If you specify this parameter, you must also specify the model,
serialnum, vrpusubinfo, and numOfVhsdElementsFilter
parameters. For the vrpusubinfo parameter, specify
VHostStorageDomain.
Optional
startVhsdEle-
mentNumFilter
Number of virtual host storage domains for which information is
to be obtained
Specify this parameter if you want to obtain virtual information
about some of the virtual host storage domains in a specific storage
system.
If you specify this parameter, you must also specify the model,
serialnum, vrpusubinfo, and
startVhsdElementNumFilter parameters. For the
vrpusubinfo parameter, specify VHostStorageDomain.
The maximum recommended value is 4096.
Optional
numOfVhsdEle-
mentsFilter
Command reference244