HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Parameters
Table 81 GetStorageArray (subtarget=VResourcePartitionUnit) command parameters
DescriptionStatusParameter name
Specify VResourcePartitionUnit.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Resource group ID of the virtual resource group
Specify this parameter if you want to obtain information about a
specific virtual resource group. If you specify this parameter, you
must also specify the model and serialnum parameters.
Optional
vrpuid
Family of the virtual storage machine
Specify this parameter if you want to obtain information about a
specific virtual storage machine.
Optional
vfamily
Serial number of the virtual storage machine
Specify this parameter if you want to obtain information about a
specific virtual storage machine.
Optional
vserialnum
Resource group name of the virtual resource group
Specify this parameter if you want to obtain information about a
specific virtual resource group. If you specify this parameter, you
must also specify the model and serialnum parameters.
Optional
vrpuname
Information about the virtual resource group
Available values are VHostStorageDomain, VLDEV, and VPort.
If you specify multiple values at the same time, separate the values
by commas.
Optional
vrpusubinfo
ID of the virtual port
Specify this parameter when you want to obtain information about
a specific virtual port.
If you specify this parameter, you must also specify the vfamily,
vserialnum, and vrpusubinfo parameters. For the
vrpusubinfo parameter, specify VHostStorageDomain or
VPort.
Optional
vport
CLI Reference Guide 243