HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Filter used to select LDEVs that belong to the physical resource
group
The values you can specify are ASSIGNED (exists) or
UNASSIGNED (does not exist).
If you specify this parameter, you must also specify PLDEV for
the prpusubinfo parameter.
If you omit this parameter, operations are performed on all LDEVs.
Optional
pldevfilter
Filter used to select host storage domains that belong to the
physical resource group
The values you can specify are ASSIGNED (exists) or
UNASSIGNED (does not exist).
If you specify this parameter, you must also specify
PHostStorageDomain for the prpusubinfo parameter.
If you omit this parameter, operations are performed on all host
storage domains.
Optional
phsdfilter
Starting sequence number of parity groups that belong to a
physical resource group and for which you want to obtain
information
Specify this parameter when you want to obtain information for
a part of parity groups in a specific storage system.
When parity group information is ordered as shown below and
numbered from 0 upward, specify the first number in the sequence
of parity groups that you want to obtain.
Order of parity groups:
1. Chassis numbers in ascending order
2. Parity group numbers in ascending order
If you specify this parameter, you must also specify the
serialnum, model, rpuid, and
numOfPldevElementsFilter parameters.
Optional
startPagEle-
mentNumFilter
Number of the first parity group that belongs to a physical
resource group and for which information is obtained
Specify this parameter when you want to obtain information for
a part of parity groups in a specific storage system. Specify the
number of parity groups for which information is to be obtained.
This parameter must be specified together with the model,
serialnum, rpuid, and startPagElementNumFilter
parameters. Specify PArrayGroup for the prpusubinfo
parameter.
The maximum recommended value is 4096. Make sure that the
sum of the values you specify for the
startPagElementNumFilter and
numOfPagElementsFilter parameters is in the range from
1 to 2,147,483,647.
Optional
numOfPagEle-
mentsFilter
CLI Reference Guide 231