HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

DescriptionStatusParameter name
Information about the LDEV
You can specify VolumeConnection or VLDEV. To specify
multiple values at the same time, separate each value with a
comma.
You can specify VLDEV only for HP XP7 or P9500 (with a
microcode version of 70-03-30-XX/XX or later).
If you specify this parameter, you must also specify the
lusubinfo=LDEV.
Optional
ldevsubinfo
Filter for selecting a THP/Smart volume
Specify either the pool ID of a THP/Smart pool, or Unassigned.
If you specify the pool ID of a THP/Smart pool, information about
the THP/Smart volumes assigned to that THP/Smart pool is
obtained.
If you specify Unassigned, information about THP/Smart
volumes not assigned to a THP/Smart pool is obtained.
This information cannot be obtained by the partitioned storage
administrator.
If you specify model and serialnum at the same time, the
specification for this parameter becomes invalid.
Optional
thpvolfilter
Starting sequence number of logical units for which information
is to be obtained
Specify this parameter when you want to obtain information for
a part of logical units in a specific storage system.
When the logical unit information is ordered by device number
(in ascending order) from 0, specify the first number in the
sequence of logical units that you want to obtain.
This parameter must be specified together with the
numOfElementsFilter, model, and serialnum parameters.
Optional
startElement-
NumFilter
Number of logical units for which information is to be obtained
Specify this parameter when you want to obtain information for
a part of logical units in a specific storage system. Specify the
number of logical units for which information is to be obtained.
This parameter must be specified together with the
startElementNumFilter, model, and serialnum
parameters.
The maximum recommended value is 16384.
Optional
numOfElements-
Filter
Command reference204