HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
devnum
Obtain this value from the execution result of the GetStorageArray (subtarget=LDEV)
command. Execute this command by specifying only the model and serialnum parameters,
and LDEV for the subtarget parameter. In the execution result of this command, the required
devNum value appears under An instance of LDEV. Use this devNum value to specify the
devnum parameter.
Command execution example
In this example, the GetStorageArray (subtarget=LDEV) command obtains information about
a specific LDEV (device number: 0) in a storage system (serial number: 10001, model: XP12000).
hdvmcli GetStorageArray -o "D:\logs\GetStorageArray_LDEV.log"
subtarget=LDEV model=XP12000 serialnum=10001 devnum=0
"ldevsubinfo=VolumeConnection" "ldevfilter=open"
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1756 Ldev elements:
An instance of LDEV
objectID=*****
devNum=0
displayName=00:00
emulation=OPEN-3
cylinders=0
isComposite=0
sizeInKB=2,403,360
lba=1,201,680
raidType=RAID5(3D+1P)
substance=1
volumeType=3
slotSizeInKB=48
chassis=1
arrayGroup=0
arrayGroupName=1-1-1
path=true
onDemandDevice=false
devType=
isStandardLDEV=true
guardMode=
diskType=0
slprNumber=-1
CLI Reference Guide 199