HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Value to be specified for the subinfo parameter and acquir-
able information
Specifiable
subinfo parameter
Value of the para-
meter subtarget
ReplicationInfo: Information about Fast Snap copy pairs
that belong to a snapshot group
snapshot-
grpsubinfo
SnapshotGroup
The following information about virtual resource groups can be
acquired:
VHostStorageDomain: Information about the virtual host
storage domains
VLDEV: Information about the virtual LDEVs
VPort: Information about the virtual ports
vrpusubinfo
VResourceParti-
tionUnit
The following table shows examples of specifying the parameter subtarget and the subinfo
parameters.
Table 59 Examples of using the GetStorageArray command
Command specificationInformation to acquire
GetStorageArray subtarget=LDEV
LDEV information
GetStorageArray
subtarget=LogicalUnit
lusubinfo=Path
Information about paths for logical units
GetStorageArray subtarget=LDEV
ldevsubinfo=VolumeConnection
Mapping information of external volumes for LDEVs
GetStorageArray
subtarget=ArrayGroup
arraygroupsubinfo=LogicalUnit
lusubinfo=LDEV,Path
Information about logical units for parity groups and about
LDEVs and paths for those logical units
GetStorageArray subtarget=Path
pathsubinfo=WWN,HostInfo
Information about paths and WWNs for those paths
GetStorageArray subtarget=Pool
poolsubinfo=LogicalUnit
Information about pools and logical units for those pools
For details about parameters other than the parameter subtarget and the subinfo parameters, see
GetStorageArray (subtarget not specified) on page 175 to GetStorageArray
(subtarget=VResourcePartitionUnit) on page 242.
GetStorageArray (subtarget not specified)
By executing GetStorageArray without specifying the subtarget parameter, you can obtain
basic information about all the storage systems (including SMI-S enabled storage systems) that are
registered on the Device Manager server.
Format
When obtaining information about all storage systems:
CLI Reference Guide 175