HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

LocationInformation that can be acquiredValue of subtarget
GetStorageArray (subtarget=VRe-
sourcePartitionUnit), page 242
Information about virtual resource groups
VResourceParti-
tionUnit
Table 58 Subinfo parameters that can be used together with the parameter subtarget
Value to be specified for the subinfo parameter and acquir-
able information
Specifiable
subinfo parameter
Value of the para-
meter subtarget
The following information about parity groups can be acquired:
• ExternalPathInfo: External path information about extern-
al parity groups
• LogicalUnit: Logical unit information
• PDEV: PDEV information
• RelatedDistributedArrayGroup: Information about
other parity groups that belong to the same concatenated
parity groups
array-
groupsubinfo
ArrayGroup
Specify LogicalUnit for the parameter arraygroupsubinfo
when using this parameter.
The following information about logical units for each parity group
can be acquired:
• LDEV: LDEV information
• Path: Path information
lusubinfo
The following information about host storage domains can be
acquired:
• FreeLUN: Information about LUNs that can be assigned to
the host storage domains
• Path: Path information
• VHostStorageDomain: Information about the virtual host
storage domains
• WWN: WWN information
hsdsubinfo
HostStorageDo-
main
The following information about LDEVs can be acquired:
• VLDEV: Information about the virtual LDEVs
• VolumeConnection: Mapping information of external
volumes for LDEVs
ldevsubinfoLDEV
The following information about logical units can be acquired:
• LDEV: Information about the LDEVs
• Path: Path information
• VolumeConnection: Mapping information of external
volumes for LDEVs
lusubinfo
LogicalUnit
Specify Path for the parameter lusubinfo when using this
parameter.
The following information about paths assigned to the logical
units can be acquired:
• HostInfo: Host information
• WWN: WWN information
pathsubinfo
CLI Reference Guide 173