HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)
Command execution result
RESPONSE:
(Command completed; empty list returned)
DeletePHSDFromPRPU
The DeletePHSDFromPRPU command deletes a host storage domain that belongs to a physical
resource group from a specific physical resource group, and then moves the host storage domain to
a physical resource group (meta_resource) whose resource group ID is 0.
NOTE:
• You can use this command only when you are using HP XP7.
• To delete the location to which multiple host storage domains belong, use the batch function. For
details about the batch function, see Chapter 6 on page 503.
Format
hdvmcli [URL] DeletePHSDFromPRPU [options]
model=model serialnum=serial-number
{port=port-number|portname=port-name} domain=domain-ID
Parameters
Table 47 DeletePHSDFromPRPU command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Port number of the host storage domain that belongs to the
physical resource group
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error occurs.
Optional
port
Port name of the host storage domain that belongs to the physical
resource group
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error occurs.
Optional
portname
Domain ID of the host storage domain that belongs to the physical
resource group
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
Required
domain
CLI Reference Guide 147