HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Command execution result
RESPONSE:
(Command completed; empty list returned)
DeletePArrayGroupFromPRPU
The DeletePArrayGroupFromPRPU command deletes a parity group that belongs to a physical
resource group from a specific physical resource group, and then moves the parity group to a physical
resource group (meta_resource) whose resource group ID is 0.
NOTE:
• You can use this command only when you are using HP XP7.
• All parity groups in a concatenated parity group must belong to the same physical resource group.
If a parity group to be specified is a parity group in a concatenated parity group, specify all the
parity groups that have the same concatenation ID.
• To delete the location to which multiple parity groups belong, use the batch function. For details
about the batch function, see Chapter 6 on page 503.
Format
hdvmcli [URL] DeletePArrayGroupFromPRPU [options]
model=model serialnum=serial-number
{chassis=chassis-number groupnum=parity-group-number
|arraygroupname=parity-group-name}
Parameters
Table 46 DeletePArrayGroupFromPRPU command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Number of the chassis containing the parity group that belongs
to the physical resource group
This parameter must be specified together with the groupnum
parameter.
You must specify chassis and groupnum together, or specify
arraygroupname. Do not specify the combination of chassis
and groupnum together with arraygroupname. If they are
specified at the same time, an error occurs.
Optional
chassis
CLI Reference Guide 145