HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

Parameters
Table 38 AddVLDEVToVRPU command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Resource group ID of the virtual resource group
Specify the resource group ID of the virtual resource group to which
a virtual LDEV is to be added or that contains a virtual LDEV whose
virtual information is to be updated.
If stay is specified for the creationoption parameter, for this
vrpuid parameter specify the resource group ID of the physical
resource group to which the LDEV belongs.
Required
vrpuid
Device number of the virtual LDEV
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
The execution results are output in decimal.
Required
devnum
Virtual device number of the virtual LDEV
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
The execution results are output in decimal.
If this parameter is omitted, an unused virtual device number in the
virtual resource group is assigned.
This parameter is ignored if withoutvid is specified for the
vldevoperation parameter.
Optional
vdevnum
Virtual emulation type of the virtual LDEV
The following are the specifiable emulation types:
• OPEN-3
• OPEN-8
• OPEN-9
• OPEN-E
• OPEN-K
• OPEN-L
• OPEN-V
If this parameter is omitted, it is assumed that OPEN-V is specified.
This parameter is ignored if withoutvid or withoutvattr is
specified for the vldevoperation parameter.
Optional
vemulation
CLI Reference Guide 131