HP XP7 Command View Advanced Edition CLI Reference Guide (TK981-96006, May 2014)

migrationInterval=24
monitorStartTime=00:00
monitorEndTime=23:59
monitoringMode=0
externalMixCompatible=enable
monitoringState=-1
lastMonitorStartDate=-1
lastMonitorEndDate=-1
relocationState=-1
relocationProgress=-1
relocationSpeed=-1
numberOfTiers=-1
thresholdRepDepAlert=-1
thresholdRepDataReleased=-1
userUsedCapacityInKB=-1
repDataCapacityInKB=-1
repManageCapacityInKB=-1
numberOfDpVols=-1
capacityOfDpVolsInKB=-1
List of 1 Lu elements:
An instance of LogicalUnit
.
. (Attributes of LogicalUnit are omitted here)
.
*****: The values are encoded by the CLI.
AddPPortToPRPU
The AddPPortToPRPU command registers a port that belongs to a physical resource group to a
specific physical resource group. The port is registered from a physical resource group (meta_resource)
whose resource group ID is 0.
NOTE:
• You can use this command only when you are using HP XP7.
• To register the location to which multiple ports belong, use the batch function. For details about
the batch function, see Chapter 6 on page 503.
Format
hdvmcli [URL] AddPPortToPRPU [options]
model=model serialnum=serial-number
rpuid=physical-resource-group-ID
{port=port-number|portname=port-name}
Parameters
Table 34 AddPPortToPRPU command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
CLI Reference Guide 111