HP XP7 Command View Advanced Edition 8.0.0-01 Release Notes

• Device Manager now supports roles that can be specified in Element Manager of HP XP7 by roles
allocated to resource groups of HP XP7.
• The Device Manager GUI now supports the displaying and configuration of Virtual Storage
Machine in HP XP7.
• The design of the Device Manager GUI was improved.
• Device Manager now supports HP XP7 Storage.
The end of support for the Tiered Storage Manager GUI in Legacy mode
To execute or confirm a task registered from the Tiered Storage Manager GUI in Legacy mode, use
the Tiered Storage Manager CLI.
Fixes
The following issues were resolved in 8.0.0-01:
• Even if you execute an operation to automatically refresh the summary of all the logical groups,
the summary of the public logical groups on the Resource tab or Mobility tab might not be
refreshed.
• When you edit the WWN nickname from the Edit WWN Nicknames and Exchange HBAs dialog
boxes, the host mode for the entire target host group will be reset to "Standard".
• In CIM/WBEM function, the following values returned for GetSupportedSizeRange of the class
HITACHI_StoragePool for an external storage system were 0:
• MinimumVolumeSize
• MaximumVolumeSize
• VolumeSizeDivisor
• In CIM/WBEM function, if many paths were assigned or if many initiator port IDs were specified,
ExposePaths took a long time to execute(*).
(*) When three paths were assigned or 10 initiator port IDs were specified, the execution time
was approximately 10 minutes.
• In the Create Pool or the Edit Pool dialog box, if you customized the tier management, selected
the monitoring template, then clicked Submit, the KAIC16993-E error occurred and the task
couldn't be executed. Alternatively, if you tried to edit the monitoring template, the KAIC16993-E
error occurred and the monitoring template couldn't be edited.
• When the ModifyReplication or DeleteReplication commands in CLI were used to modify or delete
a specific Fast Snap copy pair, the settings of the pvoldevnum parameter were unintentionally
not specified, and all the copy pairs in the Snapshot Group were modified or deleted.
• The GetStorageArray command for Device Manager CLI did not complete and issued the
KAIC90083-E (error code=3005) error message.
◦ Symptom 1: If the following procedure was performed, the KAIC15423-E or KAIC15467-E
occurred:
1. In the Added User window, a user with a user name of 256 characters was added.
2. In the Created User Group window, the user added in (1) was allocated the default
resource group or a user-defined resource group.
◦ Symptom 2: After Symptom 1 occurred, an attempt to set the relations for the user group and
resource group failed, and the following errors occurred:
- KAIC15422-E
- KAIC15423-E
- KAIC15467-E
6 Fixes