HP XP7 Command View Advanced Edition 8.0.0-01 Release Notes

Device Manager CLI:
• Symptom 3: The AddVirtualizationServer command fails to add a host and the error message
KAIC07122-E or KAIC08244-E is output.
• Symptom 4: The RefreshVirtualizationServer command or Modify VirtualizationServer command
fails to refresh or edit a host and the error message KAIC07667-E is output.
*1: If several of virtualization servers are managed by VMware vCenter server in bulk, that VMware
vCenter server is affected.
If this problem occurs, perform the following recovery measures:
1. In Device Manager, delete all of the affected virtualization servers.
2. Add the deleted virtualization server to Device Manager again.
NOTE: If the virtualization server is being managed by specifying the IP address of the VMware
vCenter server in Device Manager, this symptom occurs if there is at least one virtualization server
that meets the occurrence conditions.
If you cannot identify the virtualization server that meets the occurrence conditions, execute Host Refresh
to the virtualization server that is managed by the VMWare vCenter server from GUI or CLI. The
virtualization server that meets the occurrence conditions is the virtualization server that has the error
code KAIC07667-E.
This problem is due to the change described in the following entry in the VMWare knowledge base:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2033753.
"PR 849959: If the SMBIOS version of the ESXi 5.0 system is of version 2.6 or later, the SMBIOS
UUID reported by the ESXi 5.0 host might be different from the actual SMBIOS UUID. The byte order
of the first three fields of the UUID is not correct.”
Upgrading Device Manager from a version earlier than 7.5.0–00
When upgrading Device Manager from a version earlier than 7.5.0–00, refresh all hosts and all file
servers except for virtualization servers.
Upgrade installations of Host Data Collector from 7.4.1 or earlier to 7.5.0 or later
The differences between Host Data Collector version 7.4.1 or earlier and 7.5.0 or later are as follows:
1. Host Data Collector 7.5.0 or later does not use the following ports:
5001/tcp, 23050/tcp, 23051/tcp, and 23052/tcp
Instead Host Data Collector 7.5.0 or later uses the following ports by default: (*1)
• For non-SSL communication between the Device Manager server and the Host Data Collector:
22098/tcp, 22099/tcp, and 22100/tcp
• For SSL communication between the Device Manager server and the Host Data Collector:
22104/tcp, 22105/tcp, and 22106/tcp
• For communication between the Service process and the Adapter process: 22110/tcp, From
22111/tcp to 22120/tcp
(*1) Host Data Collector (for Windows) 7.3.1 or later already uses these ports.
2. In Host Data Collector 7.5.0 or later, the following property files were abolished:
• alps.properties file
• about.properties file
• log4jconfig.properties file
3. In Host Data Collector (for Windows) 7.5.0 or later, the service name was changed from "Host
Data Collector" to "Host Data Collector Base Service".
52 Installation instructions