HP XP7 Command View Advanced Edition 8.0.0-01 Release Notes

No. of Parity Groups
Total Capacity
File servers columns:
Model
Storage systems columns:
Model
Data collection tasks columns:
Target Type
The filtering result of the following columns might not be correct.
Volumes columns:
No. of Paths
Filesystem
Filesystem Used %
Vendor
Parity groups columns:
Total Capacity
THP pools columns:
Subscription
Hosts columns:
OS
Editing and selecting external paths
In the Edit External Paths dialog box or the Add/Remove External Paths dialog box that starts from
the Virtualize Volumes dialog box, if you can execute a volume virtualization task in which nine or
more external paths were set and created, but the task does not complete and issues the KAIC15001-E
message. When you create external paths in a volume virtualization task, create eight or fewer (storage
system specification). If the error above occurs, delete the external path settings, create eight or fewer
specified external paths, and then re-execute the volume virtualization task.
Virtualizing storage devices
If you perform a volume virtualization task created under all of the following conditions in the Virtualize
Volumes dialog box, the task generates a KAIC15001-E error:
The external paths are set to the volumes that are selected when you launch the Virtualize Volumes
dialog box.
Both of the ports on the internal storage side and external storage side in the external paths
described in the first condition are selected.
Virtualize a storage device by either of the following methods:
Using the GUI: Perform either of the following operations, then retry the volume virtualization task.
Cancel the external path assigned to the external volumes.
Create a new path by selecting a port other than the ports of the internal storage system, or by
selecting a port other than the ports of the external storage system.
Not using the GUI:
CLI AddExternalArrayGroup command.
Element Manager, Remote Web Console, or XP Remote Web Console.
Important considerations 39