HP XP P9000 Tiered Storage Manager Software 7.6.1-00 CLI Reference Guide

Specifiable characters or valuesOperatorsProperty name
Specify no more than 75 bytes.
=, <>,
startsWith,
contains
VOLSER
#1
Locked
Unlocked
=VolumeLockStatus
Used
Free
=VolumeStatus
Simplex
P-VOL
V-VOL
POOL
=, <>
XPSnapshot
( SnapshotXP )
-
THP-VOL
THP-Pool-VOL
=, <>XPThinProvisioning
Legend:
( ): Indicates the character string that is used for XP12000/XP10000/SVS200.
#1
This property cannot be specified for filter condition expressions for storage tiers (the filter-
condition parameter of the CreateStorageTier command, and the newfiltercondition
command of the ModifyStorageTier command).
#2
When possible, capacity values in the output information of CLI commands are expressed in a
higher-order unit than the unit specified by the user. For example, the value 10,240 KB is displayed
as 10MB.
#3
For the drive capacity, a value in KB is obtained from Device Manager. However, in Tiered
Storage Manager software, the gigabyte-conversion of those values is used. This conversion in-
volves dividing the drive capacity by 1,048,576 (1,024 x 1,024) and then rounding to the
nearest integer.
#4
This property is provided to maintain compatibility with previous versions. To specify a new filter
condition, use SubsystemDisplayModel.
Table 9 Range of valid property values for pool filter conditions
Specifiable values or charactersOperatorsProperty name
Specify a positive integer, or a positive integer with
a unit. (For example, 256, 500KB, or 10MB.)
• Specify an integer from 0 to
281,474,976,710,653 KB
• The units you can specify are KB, MB, GB, and TB.
KB is the default unit.
#
=, <>, >, >=, <, <=PoolFreeCapacity
CLI Reference Guide 47