HP XP P9000 Tiered Storage Manager Software 7.6.0-00 Release Notes

• The KATS50201-E and KATS61103-E* messages are displayed for the CreateStorageTier
command, and tiers cannot be created.
• The KATS50221-E and KATS61103-E* messages are displayed for the ModifyStorageTier
command, and tiers cannot be edited.
*The KAIC03016-E message is displayed in the KATS61103-E message.
If an error occurs, shorten the character length of the filter condition.
To save a filter condition that uses two-byte characters in the name, enter the two-byte characters (no
more than 16 characters) in the Edit Storage Systems dialog box.
Upgrading HP XP P9000 Command View Advanced Edition from 7.4.1 or earlier (in
Windows)
In an environment where Host Data Collector (for Windows) version 7.4.1 or earlier is installed, the
Fatal Application Error dialog box might appear during an upgrade installation of HP XP P9000
Command View Advanced Edition. If this dialog box appears, click OK to ignore it and to continue
the upgrade installation. Even if this dialog box appears, HP XP P9000 Command View Advanced
Edition operations will continue.
Temporary shortcut folder after installation or removal (in Windows)
After an installation or removal, a temporary shortcut folder named "programs" might be created
under the Windows Start menu. After you log off and log on to Windows, this temporary shortcut
folder no longer appears.
Specifying is not or <> in filter conditions
When is not or <> is specified in a filter condition for one of the following columns in a window
that lists parity groups, volumes, or Data Placement Profiles, data that does not meet the filter conditions
may be displayed.
Columns related to parity groups:
• Parity Group
• Drive Type
• Drive Speed (RPM)
Columns related to volumes:
• Host
• Target ID
• Copy Info (S-VOL)
• Copy Info (P-VOL)
• Parity Group
• Volume Attributes
Columns related to Data Placement Profiles:
• Status
Executing the GetFreeSpaces command for an SMI-S Enabled storage system
After changing the name of an SMI-S Enabled storage system from the Device Manager GUI, if the
GetFreeSpaces command of the Tiered Storage Manager CLI was executed with the
SubsystemName property specified for the filtercondition parameter, filtering was not correctly
performed and the results output by the command were empty.
4 Important considerations