HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

sizeInKB=209,715,200
lba=419,430,400
raidType=-
substance=0
volumeType=-1
slotSizeInKB=48
chassis=16,485
arrayGroup=199
arrayGroupName=X200-1
path=false
onDemandDevice=false
devType=
isStandardLDEV=true
diskType=-1
slprNumber=-1
clprNumber=0
cacheResidencyMode=0
stripeSizeInKB=-1
volumeKind=3
status=Normal
thpType=0
consumedSizeInKB=0
mfTrueCopyVolumeType=Simplex
mfShadowImageVolumeType=Simplex
mfUniversalReplicatorVolumeType=Simplex
mfUniversalReplicatorPoolID=-1
thpPoolID=0
threshold=10
systemDisk=0
encrypted=0
tieringPolicy=-1
resourcePartitionUnitID=-1
List of 1 FreeSpace elements:
An instance of FreeSpace
objectID=*****
sizeInKB=2,801,729,280
cylinders=0
fsControlIndex=0
*****: The values are encoded by the CLI.
AddVLDEVToVRPU
AddVLDEVToVRPU adds an LDEV to a resource group used for data migrations that use virtual IDs,
and registers the LDEV virtual information. If LDEV virtual information is already registered, the LDEV
virtual information is updated.
NOTE:
• This command can be used only with P9500 with a microcode version of 70-05-04-XX/XX or
later.
• To add multiple LDEVs, use the batch function. For details about the batch function, see Chapter
6 on page 443.
To register and update LDEV virtual information, the LDEV must satisfy the following conditions:
• It is not a pool volume or a journal volume.
Command reference104