HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

DescriptionAttribute
Usage rate threshold of the THP/Smart volumes
One of the following values is output for P9500 or XP24000/XP20000:
• When the logical unit consists of THP/Smart volumes: usage rate threshold
value of the THP/Smart volumes
#1, #2
#1 When the THP/Smart volumes are not assigned to a THP/Smart pool, -1
is displayed.
#2 When the operator is a partitioned storage administrator, -1 is displayed.
• For volumes other than THP/Smart volumes : -1 is output.
-1 is output for other storage systems.
threshold
Currently, this information does not apply to storage systems (-1 is output).tcaPoolID
The name of the parity group to which the logical unit belongs
arrayGroupName
The status of a THP/Smart pool volume.
One of the following values is output for P9500:
• 2 : The THP/Smart pool can shrink.
• 1 : The THP/Smart pool is shrinking.
• 0 : The THP/Smart pool cannot shrink (for example, the initial THP/Smart pool
volume).
• -1 : The volume is normal (includes the volumes that became normal volumes
after the THP/Smart pool finishes shrinking).
-1 is output for other storage systems.
thpPoolVolControl-
Flag
Currently, this information does not apply to storage systems (-1 is output).
managementAreaPool-
ID
External LDEV tier rank
This attribute is output only if the microcode version of P9500 is 70-04-00-XX/XX
or later and the THP/Smart pool volume is an external volume.
externalTierRank
MFReplicationInfo instance
Commands for which an MFReplicationInfo instance is output
• GetStorageArray (subtarget=MFReplicationInfo) , page 168
Table 136 MFReplicationInfo instance attributes
DescriptionAttribute
Object ID of MFReplicationInfoobjectID
Serial number of the storage system containing the P-VOL
pvolSerialNumber
Type of the storage system containing the P-VOL
If the storage system containing the P-VOL is not registered, Unknown is output.
pvolArrayType
Device number of the P-VOL
pvolDevNum
Output items376