HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

DescriptionAttribute
Indicates whether the data that is stored in the LDEV is encrypted.
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• 0: The data is not encrypted.
• 1: The data is encrypted.
-1 is output for other storage systems.
encrypted
Capacity (KB) that has been assigned to THP/Smart volumes from the hardware
tier whose ID (tierID) is 0
thpTier0ConsumedCa-
pacityInKB
Capacity (KB) that has been assigned to THP/Smart volumes from the hardware
tier whose ID (tierID) is 1
thpTier1ConsumedCa-
pacityInKB
Capacity (KB) that has been assigned to THP/Smart volumes from the hardware
tier whose ID (tierID) is 2
thpTier2ConsumedCa-
pacityInKB
Tiering policy applied for Smart volumes
This attribute is valid only when Smart volumes are used in P9500.
For details about the output values, see the tieringpolicy parameter in Table
78.
tieringPolicy
Indicates whether a Smart volume is subject to hardware tier relocation.
This attribute is valid only when a Smart volume is used in P9500.
• enable: Subject to hardware tier relocation
• disable: Not subject to hardware tier relocation
tierRelocation
External LDEV tier rank
This attribute is output only if the microcode version of P9500 is 70-04-00-XX/XX
or later and the THP/Smart pool volume is an external volume.
externalTierRank
ID of the resource group to which the LDEV belongs
The ID of a resource group managed by a storage system management tool is
output.
This item is output for P9500.
-1 is output for all other storage systems.
resourceParti-
tionUnitID
LogicalDKC instance
Commands for which a LogicalDKC instance is output
• GetStorageArray (subtarget=LogicalDKC) , page 161
Table 133 LogicalDKC instance attributes
DescriptionAttribute
Logical DKC number
logicalDKCNumber
Serial number of the logical DKC recognized by a mainframe host
mfLogicalSerialNum-
ber
Output items370