HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

DescriptionAttribute
Pool ID of LDEV
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• When the LDEV is the P-VOL, S-VOL, or SP-VOL of Hitachi Universal Replicator
for Mainframe Software: Pool ID of the pool used by the logical unit
• When the LDEV is a pool volume: Pool ID of the pool to which the LDEV has
been assigned
In other cases, -1 is output.
mfUniversalReplicat-
orPoolID
Pool ID of the Thin Provisioning
One of the following values is output for P9500 or XP24000/XP20000:
• When the logical unit consists of THP/Smart volumes: Pool ID of the THP/Smart
pool to which the THP/Smart volumes are assigned.
#1, #2
• When the logical unit consists of THP/Smart pool volumes: Pool ID of the
THP/Smart pool that contains the THP/Smart pool volumes.
#2
• For other volumes : -1 is output.
#1
When the THP/Smart volumes are not assigned to a THP/Smart pool, -1 is
displayed.
#2
When the operator is a partitioned storage administrator, -1 is displayed.
-1 is output for other storage systems.
thpPoolID
Usage rate threshold of the THP/Smart volumes.
One of the following values is output for P9500 or XP24000/XP20000:
• When the logical unit consists of THP/Smart volumes: usage rate threshold
value of the THP/Smart volumes
#1, #2
• For volumes other than THP/Smart volumes : -1 is output.
#1
When the THP/Smart volumes are not assigned to a THP/Smart pool, -1 is
displayed.
#2
When the operator is a partitioned storage administrator, -1 is displayed.
-1 is output for other storage systems.
threshold
Indicates whether the LDEV is being used as a system drive.
One of the following values is output for P9500 or XP24000/XP20000:
• -1: Unknown
• 0: Not being used as a system drive
• 1: Being used as a system drive
0 is output for other storage systems.
systemDisk
Name of the parity group to which the LDEV belongs
arrayGroupName
CLI Reference Guide 369