HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

Command execution result 1-2: when managing the virtualization server with Host Data Col-
lector (IP address: 10.208.119.110)
In the execution result, hdcIPAddress appears in the CommParameters instance, indicating that
the virtualization server is being managed by Host Data Collector.
RESPONSE:
An instance of Host
objectID=*****
name=boss.boss
hostID=13
capacityInKB=21,995,840
hostType=3
statusOfDBUpdating=0
virtualizationServerVersion=VMware ESX 4.0.0 build-171294
List of 2 WWN elements:
An instance of WWN
WWN=21.00.00.24.FF.2C.AE.19
An instance of WWN
WWN=21.00.00.24.FF.2C.AE.18
List of 1 CommParameters elements:
An instance of CommParameters
hdcIPAddress=10.208.119.110
ipAddress=10.208.119.113
portNumber=443
protocol=Secure
userID=root
*****: The value is encoded by the CLI.
RefreshVirtualizationServer
RefreshVirtualizationServer refreshes information about virtualization servers.
Parameters
Table 104 RefreshVirtualizationServer command parameter
DescriptionStatusParameter name
Host name
Specify the host name of the virtualization server whose
information you want to refresh.
Required
hostname
Parameter values to obtain in advance
hostname
Obtain this value from the execution result of the GetHost command. Execute this command by
specifying VMWARE_ESX for the hostfilter parameter. In the execution result of this command,
the name value appears under An instance of Host. In the hostname parameter, specify
the name value for the virtualization server whose information you want to refresh.
CLI Reference Guide 307