HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

GetStorageArray
GetStorageArray obtains information about storage systems managed by the Device Manager
server.
To acquire the information about a specific element or to narrow down the range of information
acquired by specifying conditions, use the parameter subtarget, the subinfo parameters (such as
the parameters arraygroupsubinfo and lusubinfo), and other parameters of the
GetStorageArray command.
Related topics
• Appendix B, page 465
Using the GetStorageArray parameter
This section describes how to acquire various information by combining the parameter subtarget
and the subinfo parameters of the GetStorageArray command.
The parameter subtarget:
Use this parameter to acquire more specific information about an element than the basic storage
system-related information that can be obtained by the GetStorageArray command.
NOTE:
When you execute the GetStorageArray command with the subtarget
parameter specified and without the model and serialnum parameters specified,
if a value other than 0 is specified for statusOfDBInconsistency (which is
displayed under An instance of StorageArray as the result of the
GetStorageArray command), information of the component specified for the
subtarget parameter might not be output to the command output. If a value
other than 0 is written for statusOfDBInconsistency, this indicates that the
status of the database is inconsistent. For details about the meaning of the
statusOfDBInconsistency values other than 0, see “StorageArray
instance” on page 400.
The subinfo parameters:
Specify the subinfo parameters when you want to acquire the information related to a specific
element specified for the parameter subtarget. The subinfo parameters that you can specify
differ depending on the value of the parameter subtarget.
Table 44 shows the element information that can be acquired by using the parameter subtarget.
Table 45 shows the subinfo parameters that can be used together with the parameter subtarget.
Table 44 Element information that can be acquired by using the parameters subtarget
LocationInformation that can be acquiredValue of subtarget
GetStorageArray (subtarget not
specified) , page 136
Basic information about storage systems
subtarget not specified.
GetStorageArray (subtarget=Array-
Group) , page 139
Information about parity groups
ArrayGroup
Command reference132