HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

Parameters
Table 31 AddVLDEVToVRPU command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
ID of the resource group used for data migrations that use virtual
IDs
Specify the ID of the resource group to which an LDEV is to be
added or that contains the LDEV whose virtual information is to be
updated.
Required
vrpuid
Device number of the LDEV
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
The execution results are output in decimal.
Required
devnum
Virtual device number of the LDEV
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
The execution results are output in decimal.
If this parameter is omitted, an unused virtual device number in the
resource group used for data migrations the use virtual IDs is
assigned.
Optional
vdevnum
Virtual emulation type of the LDEV
The following are the specifiable emulation types:
• OPEN-3
• OPEN-8
• OPEN-9
• OPEN-E
• OPEN-K
• OPEN-L
• OPEN-V
If this parameter is omitted, it is assumed that OPEN-V is specified.
Optional
vemulation
Virtual SSID of the LDEV
Specify an integer from 4 to 65533 for the virtual SSID of the LDEV.
If this parameter is omitted, an SSID is automatically assigned in
the resource group used for data migrations that use virtual IDs.
Optional
vssid
CLI Reference Guide 105