HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-02 Release Notes (TB581-96351, July 2013)

• Operations to register or refresh hosts by using Host Data Collector timed out.

• An IPv6 address collected by Host Data Collector was not displayed correctly

• The file system usage percentage collected by Host Data Collector was not displayed correctly.

• There were vulnerabilities concerning cross-site scripting in Device Manager.

• If the length of the password for the account used for registering hosts was 129 or more characters,

operations to register hosts by using Host Data Collector were not successful

• Operation for the host on which the Device Manager agent was installed generated a

KAIC07790-E, KAIC07931-E, or KAIC07965-E error message, and Host Name, File System,

File System Used %, and Target ID would not display relevant information on the screen for the

host on which symptoms occurred.

Important considerations

Using Device Manager to update the information about a storage system

Do not delete a host while the information about a storage system is being updated. If you do delete

a host while the information about a storage system is being updated, the update might not succeed.

If the update does not succeed, update the information again.

Settings for Host Data Collector

If Host Data Collector is installed on a host other than the host on which the Device Manager server

is installed, and multiple IP addresses have been set for the host on which Host Data Collector is

installed, specify the following settings.

If you do not specify these settings, a KAIC05535-E error might be generated when you attempt to

between the Device Manager server and Host Data Collector might not succeed.

Specify the settings as follows:

1. On the host on which Host Data Collector is installed, specify the following settings:

In Windows

In the hosts file, specify the IP address and host name of the host on which Host Data Collector

is installed. Host Data Collector must be able to use this IP address to communicate with Device

Manager server. Do not specify another IP address for that host.

In UNIX

In the hosts file, specify the IP address and host name of the host on which Host Data Collector

is installed. Host Data Collector must be able to use this IP address to communicate with Device

Manager server. Do not specify another IP address for that host.

If a DNS server is used for name resolution, the host name must be resolvable to an IP address

that Host Data Collector can use to communicate with Device Manager server.

2. Restart the service Host Data Collector Base Service.

Sorting the list of logical group volumes in the Resources tab

If the Resources tab displays a volume list in a logical group that includes hosts displayed by sorting

the columns described in Target columns, the drawing of the window might not succeed, and the

KAIC16993-E message might be generated.

The KAIC16993-E message might be generated when the total result of multiplying the following

items A and B exceeds 800,000.

8 Important considerations