HP XP P9000 Command View Advanced Edition Suite Software 7.5.0-00 Administrator Guide (Web Version) (TB581-96346, July 2013)

Related topics:

• Registering an exception for the Host Data Collector service (for SSL communication), page 277

• hdc.common.rmi.registryPort, page 394

• hdc.common.rmi.serverPort, page 395

• hdc.common.http.serverPort, page 395

Registering an exception for the Host Data Collector service (for SSL communication)

Use the netsh command to register a firewall exception for SSL communication ports used by the

Host Data Collector service.

Operations to complete in advance

• Logging in with administrator permissions

Information to collect in advance

• Port number set for the hdc.common.rmi.ssl.registryPort property (Default value:

22104/tcp)

• Port number set for the hdc.common.rmi.ssl.serverPort property (Default value: 22105/tcp)

• Port number set for the hdc.common.https.serverPort property (Default value: 22106/tcp)

To register a firewall exception for the Host Data Collector service:

1. Execute the following command for each port.

In Windows Server 2003 or Windows Server 2003 R2:

netsh firewall add portopening protocol=TCP port=port-number

name="Host Data Collector Base" mode=ENABLE

In Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012:

netsh advfirewall firewall add rule name="Host Data Collector Base"

dir=in action=allow localport=port-number protocol=TCP

2. Restart the Host Data Collector service to enable the settings.

TIP:

To check the registered information, execute the following commands:

In Windows Server 2003 or Windows Server 2003 R2:

netsh firewall show portopening

In Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012:

netsh advfirewall firewall show rule name=all