HP StorageWorks XP Replication Monitor software installation and configuration guide (T1784-96008, November 2006)

Creating a cluster environment 100
"C:\Program Files\CVXPAE\Base\bin\hcmdssrv" /status
If any of the Common Component services is running, use the Cluster Administrator window to place the
HiRDB/ClusterService_HD0 service online, and then execute the following command:
"C:\Program Files\CVXPAE\Base\bin\hcmdssrv" /stop
After the services have stopped, use the Cluster Administrator window to place the
HiRDB/ClusterService_HD0 service offline.
2. Install the XP Replication Monitor server.
For details, see section
2-3-1 .
3. Open the Services window by selecting Start, Settings, Control Panel, Administrative Tools, and Services,
and then make sure that Startup Type for each of the following services is set to Manual. If Startup Type is
set to Automatic, change it to Manual.
• HBase Storage Mgmt Common Service
• HBase Storage Mgmt Web Service
• DeviceManagerServer
• HiRDB/ClusterService_HD0
4. In the Cluster Administrator window, right-click the following services, select Property, click the Advanced
tab, select Restart, and then click OK.
• HBase Storage Mgmt Common Service
• HBase Storage Mgmt Web Service
• DeviceManagerServer
• HiRDB/ClusterService_HD0
5. In the Cluster Administrator window, right-click the group to which the Device Manager service
(DeviceManagerServer) has been registered, and then select Move Group to switch to the executing node.
6. In the Cluster Administrator window, right-click the group to which the Device Manager service
(DeviceManagerServer) has been registered, and then select Online.
7-2-1-2 Registering license information
In a cluster environment in Windows, the license information must be registered on both the executing and
standby nodes.
To register license information:
1. On the executing node, display the Login window for the web client, and then register license information.
2. Switch to the standby system.
3. On the standby node, display the Login window for the web client, and then register license information.
4. Switch to the executing system.
For details about how to register license information, see section
3-2 . For details about how to switch between
the executing and standby systems, see step 7 in
7-2-1-1-1 for Windows, and steps 3 (only perform the Switch To
operation from the bulleted list).
7-2-2 Upgrade installation and re-installation
This subsection describes the procedures for upgrading or re-installing an existing XP Replication Monitor server.
7-2-2-1 In Windows
7-2-2-1-1Upgrading or re-installing on the executing node
To upgrade or re-install the XP Replication Monitor server on the executing node when the OS is Windows:
1. Open the Cluster Administrator window by selecting Start, Settings, Control Panel, Administrative Tools,
and then Cluster Administrator, and then place the following services offline:
• DeviceManagerServer