HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

XP Command View AE Suite Common Component
169
Table 5-19 List of options of detail messages
Output Character
String
Operation
exist
Creates a virtual volume in an existing virtual volume group.
force
• If the target is LUSE
Creates an LUSE in the logical unit that already has paths.
• If the target is Virtual Volume
The virtual volume associated with a pool is disassociated from the
pool and deleted.
suspend
Creates a 3DC pair by using XP Continuous Access Journal Software.
lusekeep
Keeps the LUSE.
noformat
Creates a logical unit without formatting.
numOfLUs:n
Specifies the number of virtual volumes to be created (indicated by n).
split
Splits the pair.
resync
Copies the data of the primary volume to the secondary volume.
restore
Copies the data of the secondary volume to the primary volume.
remainMigraion
Leaves the plan status of the completed plan in the subsystem (SVP).
unassign
Disassociates a virtual volume from a pool.
The table below provides the attribute value output sequence for each element.
Table 5-20 Attribute output sequence for each element of a detail message
Output
Character String
Full Name and Content Attribute Value Output Sequence
1
alert number
Alert
Alert
(Information about the error
that occurred in Device
Manager or the storage
subsystem)
number
Alerts
Alerts
(A group of Alert elements)
--
<model name
2
- serial number - chassis number -
array group number>, number of chassis containing
the array group, array goup number, array group
RAID level, CLPR number
ArrGrp
ArrayGroup
(Information about the array
group of the storage
subsystem)
<model
2
- serialnum - chassis - number>, chassis,
number, raidType, clprNumber
<model name
2
- serial number>, <model name
2
-
serial number>
ArrRsrv
ArrayReservation
(Lock information of the
storage subsystem)
<model
2
- serialnum>, <model
2
- serialnum>
ChangedItem
ChangedItem
(Information about the data
changed in Device
Manager)
--
LDEV information version, port information version,
LU information version, LUSE information version,
LUN information version, host mode information
version, DCR information version, CVS information
version, SSID information version, CHA information
version
ChangeI
ChangeInfo
(Version information of the
storage subsystem
configuration)
versionOfLDEV, versionOfPort,
versionOfLogicalUnit, versionOfLUSE,
versionOfLUNSecurity, versionOfHostMode,
versionOfDCR, versionOfCVS, versionOfSSID,
versionOfCHA