HP StorageWorks XP Command View Advanced Edition Common Component Security Guide Description and Operator's Guide (T1780-96308, July 2009)

Overview of Security Setup and Operation
7
evaluated based on ISO/IEC 15408. When reference manuals are also indicated, you should
refer to them.
When operating a system:
Read chapters 1, 5, and 6 when you are ready to start operating the system. This guide
describes the operations you must perform to use HP StorageWorks XP Command View
Advanced Edition Common Component in a configuration evaluated based on ISO/IEC 15408.
When reference manuals are also indicated, you should refer to them.
1-2 Overview of the System To Be Created or
Operated
The creation and operation of a secure system requires security measures against threats. This
chapter provides an overall view of a system that uses security functions that have been evaluated
based on ISO/IEC 15408 for HP StorageWorks XP Command View Advanced Edition Common
Component, and provides an overview of the security functions.
1-2-1 Overall View of the System
The HP StorageWorks XP Command View Advanced Edition system uses a server/client
configuration in which an account administrator or storage administrator accesses, over the
network, the management server on which HP StorageWorks XP Command View Advanced Edition
storage management software is installed.
The following figure shows an overall view of the system.
Figure 1-1 Overall View of the System
This guide's scope is the system components from the storage management client terminal to
management server in the figure that are used by the account administrator and storage
administrator. This section covers the management server.