HP StorageWorks XP Command View Advanced Edition Common Component Security Guide Description and Operator's Guide (T1780-96308, July 2009)

Creating a System
24
4-6 Setting Up User Authentication Information
Register and set up the authentication information for the account administrator determined as
described in section 3-4 based on section 1-3 .
The system creator must use the authentication information for the system creator to log in to the
installed HP StorageWorks XP Command View Advanced Edition software for which an
environment has been set up.
After successfully logging in to the HP StorageWorks XP Command View Advanced Edition
software, the system creator must specify the settings. For the procedure, see the applicable
reference in the following table.
4-6-1 Adding Users
Add authentication information for the user.
For the procedure, see the applicable reference in the following table.
Table 4-9 Description of the Procedure for Adding Users
Management software being used See:
XP Command View AE Device Manager XP CV AE Device Manager Help
>Managing users
>Managing account information
><See Also>
Creating a user
XP Command View AE Provisioning
Manager
--
4-6-2 Setting Up Permissions for the User
Set up the permission information assigned to the user.
For the procedure for setting up the user permission information, see the applicable reference in the
following table.
Table 4-10 Description of the Procedure for Setting Permissions
Management software being used See:
XP Command View AE Device Manager XP CV AE Device Manager Help
>Managing users
>Managing account information
><See Also>
Setting permissions for a user
XP Command View AE Provisioning
Manager
--
Since an account administrator is being set up in this case, the permission that is assigned is the
User Management permission.
4-7 Using External Authentication Servers
Starting with version 6.0.0-01, all HP StorageWorks XP Command View Advanced Edition products
allow you to use an external authentication server (either an LDAP directory or RADIUS server) in
addition to the existing authentication method, which involves using the HP StorageWorks XP